RAINSCREEN SUPPORT SYSTEMS

FOR  FIBER CEMENT PANELS/SIDING

FOR ACM PANELS

FOR CERAMIC CLADDING

FOR TERRACOTTA PANELS

CLADDING MATERIALS

FIBER CEMENT PANELS

CERAMIC PANELS

BRICK VENEER PANELS

TERRACOTTA PANELS

SUPPORT

News

Partners

Privacy policy and cookies
Terms & Conditions

Follow us

  • Instagram - Grey Circle
  • Facebook - Grey Circle
  • YouTube - Grey Circle
  • Google+ - Grey Circle
  • Pinterest - Grey Circle

Vancouver, Vancouver Island, Calgary, Edmonton, Regina, Winnipeg,

Toronto, GTA, Ottawa, Montreal, Quebec, Saint John

Boston, New York, Chicago, Seattle, Portland, San-Francisco,

Los Angeles, Las Vegas

Contact us

info@u-kon.com

Thermally broken rainscreen attachment systems for stone panel

Natural stone

Honeycomb stone

Stone veneer

ATS-228

STANDARD SYSTEM

The system is designed for hidden mounting of stone panels
The stone panel is fixing to the system of vertical and horizontal guides.
Cladding panels are hung on the horizontal rails with the help of special fastening elements (agraf). Fasteners are installed from the inside of the panel using special facade anchors.

ATS-316

STANDARD SYSTEM

An invisible way of fastening the facing panels from a natural stone. It is advisable to use the system for finishing the walls of the basement and the first floors of the building, or on buildings with increased requirements for architectural solutions. Allows mounting the stone panels with a vertical offset relative to each other.
The cladding is fixed to the system of vertical and horizontal profiles. Facing panels are installed on horizontal rails, for which in the lower and upper ends of the panel the cut is made, where installing special bars of the horizontal guide are set.

ATS-325

STANDARD SYSTEM

The system is designed for the concealed way of fastening the cladding panels from natural and agglomerated stone.
To fix the cladding panels to vertical rails, special elements are used - fixers made of corrosion-resistant steel, which is installed in the holes. Preliminary, the hole is filled with sealant and a bushing is mounted in it to ensure that the thermal deformations of the guides.

1 / 2

Please reload