ATS-101

STANDARD SYSTEM

The standard mounting for cassettes (aluminum composite panels or plates) with agraffes recess. The use of sliding bolt elements facilitates the alignment of the tape and simplifies the assembly. This system consists of standard elements and is easy to use.

ATS-102.1

STANDARD SYSTEM

A very economical mounting system for cassettes made from aluminum composite panels and s plates. The use of cassette hooks that are hooked into sliding bolt elements, allows this system a quick and easy installation on continuous profiles. The use of bolt elements facilitates the alignment of the cassettes and simplifies the assembly.

ATS-102.2

STANDARD SYSTEM

The special shape of the panels-cassettes with agraffes, allows this system to be mounted on continuous profiles.
By using the sliding-bolt elements this simplifies the assembly, as well as the alignment of the cassettes.

ATS-104

STANDARD SYSTEM

This system offers the possibility of horizontal beveled panels and plates that attach quickly with visible rivets. Rivets and screws are available upon request in matching color. The bonding as invisible fastening of the panels to the substructure is also possible.

​

ATS-112

STANDARD SYSTEM

This system offers the possibility to attach horizontal beveled panels and plates with clamping profiles.The visible Parts of the substructure are available upon request in matching color.

ATS-119.2

STANDARD SYSTEM

Specifically beveled aluminum composite panels offer the possibility to create challenging shed facades without the need for additional horizontal profiles.

​

ATS-142

STANDARD SYSTEM

This system is designed for horizontal transfer of cassettes from aluminum composite panels. The cassettes are fitted with special system profiles using the spring and groove principle, which allows for a quick and easy assembly. The stiffening of the cassettes edges is achieved by using system profiles. This principle allows the use of larger size cassettes.

​

LT-119.2

​ LIGHT SYSTEM

This system enables the creation of imbricated facades without additional horizontal profiles.

​

LT-142

LIGHT SYSTEM

This system is designed for horizontal transfer of cassettes (aluminum composite panels or sheets). The cassettes are fitted with special system profiles using the groove and tongue (spring and groove) principle, which allows (for) a quick and easy assembly. The stiffening of the cassettes edges is achieved by using system profiles. This principle allows the use of larger size cassettes.

LT-147

LIGHT SYSTEM

The standard mounting for cassettes (aluminum composite panels or sheets) with agraffes recess. The use of sliding bolt elements facilitates the alignment of the cassettes and simplifies the assembly. This system consists of standard elements and is easy to use.

ATS-102.1 H

HIGH SYSTEM

This mounting system is for cassettes from aluminum composite panels or plates. The use of cassettes hooks that are hooked into sliding bolt elements, this system allows a quick and easy installation on continuous multiple compartment profiles. The strengthened multiple compartment profile enable a bridging of long distances without intermediate supporting. Use of the bolt elements facilitate the alignment of the cassettes and simplify the assembly.

ATS-142 H

HIGH SYSTEM

This mounting system is for cassettes from aluminum composite panels or plates. The use of cassettes hooks that are hooked into sliding bolt elements, this system allows a quick and easy installation on continuous multiple compartment profiles. The strengthened multiple compartment profile enable a bridging of long distances without intermediate supporting. Use of the bolt elements facilitate the alignment of the cassettes and simplify the assembly.